RV Interior Light w Switch – 8 LEDs – Surface Mount – White by Command Electronics (RV Lighting)
https://www.etrailer.com is the world’s leading online retailer of custom-fit towing accessories. We carry thousands of vehicle accessories such as custom-fit trailer hitches for over 3,100 different vehicles, performance chips, heavy-duty towing supplies, trailer parts, bike racks, cargo carriers, step bars, tonneau covers, lights, car covers, RV supplies, floor mats, and much more, to help you make your vehicle more useful and more fun. Our decades of experience and enormous buying power ensure that you will get quality parts, and excellent service, at the lowest price possible. All this is backed by our Satisfaction Guarantee(https://www.etrailer.com/customer-service-ordering.aspx#returns) and our Lowest Price Pledge(https://www.etrailer.com/customer-service-ordering.aspx#pricepledge).
Full transcript: https://www.etrailer.com/tv-Demo-Command-Electronics-RV-Lighting-328-K-1020WSM2.aspx
Speaker 1: Today we’re taking a look at a LED RV interior light with a built in on and off switch. This ceiling or under counter light provides light for your trailer’s interior. I’m going to go ahead and turn off the overhead lights and turn the light on so we can see it in a low light setting. The on/off switch is located right there in the center and as you can see this light sends out a very nice consistent signal. Now, it is an LED system. LEDs make great replacement for incandescent lights.
They last longer, they burn brighter and they’re more efficient. With LEDs, you don’t have to worry about replacing bulbs and you don’t have to worry about brittle filaments.It’s a really nice design, very easy to control and operate. Now, this unit features a nice white lens with warm white LEDs and has a really nice plastic housing on it to give it a very good look once it’s installed. It mounts directly on the surface of your ceiling or under the cabinet. No cutouts required.
Mounting hardware’s not included but you do have four mount hole locations and to gain access to those you just need to remove the lens from the unit. It’s a two wire design, white wire’s the ground wire, black wire’s the power wire.Taking a look at the overall dimensions, starting with the overall diameter, it’s about 4 and 7/8 of an inch. The overall thickness is only about 7/8 of an inch deep or thick so it’s a nice low profile design. Also, I want to point out that the distance between each mount hole, center on center, is around 2 7/16 inches and then, if you go straight across, center on center it’s 3 7/16 inches. Operating voltage is 10 volt to 30 volt DC.
Power draw is 0.32 amps, wattage is 4.3 watts and the light output is 380 lumens.That’s going to do it for today’s look at the LED RV interior light.