Amazon Video

Nissan Electronic Throttle Body (ETB) Re-Learn Procedure

Exactly how to replace that pesky Nissan digital throttle body? Although this setup seems to be basic plug as well as play, the adhering to discovering procedures are called for to obtain your auto running appropriately: Accelerated Pedal Released Position Learn, Throttle Valve Closed Position Learn, and also Idle Air Volume Learn. Full these 3 little discovering procedures and also you’ll be back when driving quickly!

If this Re-Learn applies to your car– check out the listing listed below),( Want to understand.

Where to Buy CARDONE Nissan ETB (Electronic throttle Body): https://www.cardone.com/where-to-buy.

** RE-LEARN PROCEDURE STEPS **.

Accelerated Pedal, Released Position Learn.
1. Make certain that accelerator pedal is totally released. (1:09).
2. Turn ignition activate and also wait at the very least 2 secs. (1:14).
3. Turn ignition turn off and wait a minimum of 10 secs. (1:17).
( This procedure calls for 2 key cycles, so once more, guarantee the pedal is fully launched).
4. Turn ignition turn on and also wait at the very least 2 seconds. (1:24).
5. Transform ignition button OFF as well as wait at least 10 secs (1:29).

Throttle Valve, Closed Position Learn.
1. Make certain that accelerator pedal is completely launched. (1:38).
2. Transform ignition turn on. (1:39).
3. Transform ignition turn off as well as wait at the very least 10 seconds. (1:43).
( Make certain that throttle valve actions during these 10 seconds by verifying the operating sound.).

Idle Air, Volume Learn.
1. Make certain the accelerator pedal is fully launched. (1:59).
2. Transform ignition ON, do not begin engine, after that wait 3 secs (2:02).
3. Next off, Fully launch the accelerator as well as depress pedal 5x within 5 seconds (2:07).
Wait 7 secs, after that completely hold and also depress accelerator pedal. After Approximately 11 seconds, the Malfunction indication light will certainly switch from stable to blinking.
5. Fully release accelerator pedal as well as start the automobile within 3 seconds. (2:28).
Permit to still. Wait 20 secs.
7. Lightly rev the engine several times, as well as see to it still speed is within spec. When lorry go back to idle, the learn ought to be full. (2:36).

HERE IS THE COVERAGE FOR THIS PARTICULAR RE-LEARN PROCEDURE.

MAKE MODEL YEAR CYL LITER.
INFINITI G35 2003 – 2006 V6 3.5 L.
INFINITI I35 2002 – 2004 V6 3.5 L.
INFINITI M35 2006 – 2008 V6 3.5 L.
INFINITI TRUCKS FX35 2003 – 2009 V6 3.5 L.
NISSAN 350Z 2003 – 2005 V6 3.5 L.
NISSAN ALTIMA 2002 – 2006 V6 3.5 L.
NISSAN ALTIMA 2002 – 2006 L4 2.5 L.
NISSAN MAXIMA 2002 – 2008 V6 3.5 L.
NISSAN SENTRA 2002 – 2005 L4 2.5 L.
NISSAN SENTRA 2003 – 2005 L4 1.8 L.
NISSAN TRUCKS MURANO 2003 – 2009 V6 3.5 L.
NISSAN TRUCKS QUEST 2004 – 2009 V6 3.5 L.

Was this video handy. If so, make certain to like it, as well as make sure to register for our network.

For technological bulletins pertaining to steering click here: http://cardone.com/tech-help/.

– Website: http://cardone.com/.
– Facebook: https://www.facebook.com/CardoneIndustries/.
– Twitter: https://twitter.com/cardoneparts.

** Disclaimer **.
At CARDONE we can not guarantee against inappropriate analysis or application of the info we provide in this video clip. You need to constantly follow the encased safety and security standards, consult your OE repair work manual for proper specs when executing any kind of fix or install procedure. Any kind of injury, damage or loss that might result from incorrect use of tools, devices, or from the details contained in this video clip is the sole duty of the user, and not of CARDONE Industries.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.