Amazon Video

Taigen V2 Electronics Introduction Video

Hey Tankers !!
It has been a lengthy delay however we are finally ready to announce the final version of the Taigen V2 electronics system!
This new system permits you to use your very own transmitter right out of the box without extra hardware, brand-new audios (by means of a compatible sound card), symmetrical turret rotation, proportional smoke device operation, and a lot extra!
Make certain to have a look at our internet site at http://www.TaigenTanks.com for more info and also happy tanking!

Amazon Video

Taigen V2 Electronics Introduction Video

Hey Tankers!!
It has been a long wait but we are finally ready to announce the final version of the Taigen V2 electronics system!
This new system allows you to use your own transmitter right out of the box with no additional hardware, new sounds (via a interchangeable sound card), proportional turret rotation, proportional smoke unit operation, and much more!
Make sure to check out our website at http://www.TaigenTanks.com for more info and happy tanking!

Amazon Video

Building a Voron 2.4 Live! Part 8: Electronics and Wiring

Filafarm: http://www.filafarm.com/
BIQU Devices: https://www.biqu.equipment/

In this video clip I’ll be working on the circuitry for as much of the electronic devices compartment as I can. #sponsored #Voron # 3Dprinter.

The Voron 2.4 is a high-performance Core XY 3D printer design with a static bed, moving gantry and made to be a self-sourced set. I’ve intended to develop a Voron for some time as well as I’m exceptionally excited to lastly be doing it! Subscribe and click the bell symbol to get informed of when I go real-time.

3D printed parts have actually been gotten through the Print It Forward system (https://pif.voron.dev/) and also you can look into where I got every little thing in this link (https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing). If you pick to self resource, I recommend establishing a tracker similar to this so you understand what you require to acquire and if its been bought and/or supplied.

Filafarm have actually supplied a complete bed kit particular for the 2.4 which you can find on their internet site. Bigtreetech have actually given the Octopus control board, stepper chauffeurs as well as 12864 screen. Linneo have provided the harness/electronics package, and OneTwo3D have actually offered the Omron closeness sensor. For Voron details parts from Filafarm, check the links in my expense of products here: https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing.

More Sponsor Links.
Bigtreetech Octopus: https://www.biqu.equipment/products/pre-sale-bigtreetech-octopus-v1-0.
BigTreeTech Mini 12864 Display: https://www.biqu.equipment/products/bigtreetech-mini12864-v1-0-lcd-screen-rgb-backlight-mini-display-supports-marlin-diy-for-skr-3d-printer-part.
BigTreeTech TMC2209: https://www.biqu.equipment/products/bigtreetech-tmc2209-stepper-motor-driver-for-3d-printer-board-vs-tmc2208?_pos=1&_sid=e3b60a846&_ss=r&variant=20498074632290.
Filafarm Filaprint: https://www.filafarm.de/products/filaprint-rs-1?_pos=1&_sid=725f6f274&_ss=r&variant=40505593069745.
Filafarm Switch: https://www.filafarm.de/products/switch?variant=40505825525937.
Filafarm Precision Plate: https://www.filafarm.de/products/aluminium-prazisionsplatten?_pos=2&_sid=725f6f274&_ss=r&variant=40505371623601#.

Even More Voron Info:.
Voron 2.4 web page: https://vorondesign.com/voron2.4.
Voron 2.4 Manual [download and install]: https://github.com/VoronDesign/Voron-2/raw/Voron2.4/Docs/2.4_Assembly_Manual.pdf.
Octopus Help for Voron 2.4: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Octopus%20works%20on%20Voron%20v2.4.
RACKET Rail Mounts for WAGO 221: https://www.thingiverse.com/thing:4972435/files.

Devices.
Wera Hex Keys: https://amzn.to/3gIYdNV.
Wera Ratchet as well as Socket Set: https://amzn.to/3gH0OrY.
Knipex Cutter: https://amzn.to/2Wylf2M.
Ifixit Tool package: https://amzn.to/3BdJXES.
Wire Stripper Tool: https://amzn.to/3kC7hoW.
3M Applicator Tool: https://amzn.to/3jqc8ud.

Various other Platforms.
Patreon: https://www.Patreon.com/Vector3D.
Twitter: @Adam_V3D.

Amazon Video

Building a Voron 2.4 Live! Part 7: Skirts, Electronics and Wiring

Filafarm: http://www.filafarm.com/
BIQU Equipment: https://www.biqu.equipment/

In this video we’ll deal with doing the electrical wiring for the Afterburner PCB mod along with include the Z belts for the gantry and also maybe obtain on with the skirts if things go smoothly. #sponsored #Voron # 3Dprinter.

The Voron 2.4 is a high-performance Core XY 3D printer layout with a static bed, moving gantry and created to be a self-sourced package. I’ve wished to construct a Voron for a while and also I’m incredibly excited to finally be doing it! Subscribe and also click the bell symbol to obtain alerted of when I go real-time.

3D printed parts have been obtained through the Print It Forward scheme (https://pif.voron.dev/) and you can look into where I got whatever in this link (https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing). If you pick to self source, I recommend establishing a tracker similar to this so you understand what you require to acquire and also if its been acquired and/or provided.

Filafarm have given a full bed package specific for the 2.4 which you can find on their web site. For Voron details components from Filafarm, inspect the web links in my bill of products below: https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing.

More Sponsor Links.
Bigtreetech Octopus: https://www.biqu.equipment/products/pre-sale-bigtreetech-octopus-v1-0.
BigTreeTech Mini 12864 Display: https://www.biqu.equipment/products/bigtreetech-mini12864-v1-0-lcd-screen-rgb-backlight-mini-display-supports-marlin-diy-for-skr-3d-printer-part.
BigTreeTech TMC2209: https://www.biqu.equipment/products/bigtreetech-tmc2209-stepper-motor-driver-for-3d-printer-board-vs-tmc2208?_pos=1&_sid=e3b60a846&_ss=r&variant=20498074632290.
Filafarm Filaprint: https://www.filafarm.de/products/filaprint-rs-1?_pos=1&_sid=725f6f274&_ss=r&variant=40505593069745.
Filafarm Switch: https://www.filafarm.de/products/switch?variant=40505825525937.
Filafarm Precision Plate: https://www.filafarm.de/products/aluminium-prazisionsplatten?_pos=2&_sid=725f6f274&_ss=r&variant=40505371623601#.

More Voron Info:.
Voron 2.4 home page: https://vorondesign.com/voron2.4.
Voron 2.4 Manual [download]: https://github.com/VoronDesign/Voron-2/raw/Voron2.4/Docs/2.4_Assembly_Manual.pdf.
Octopus Help for Voron 2.4: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Octopus%20works%20on%20Voron%20v2.4.

Devices.
Wera Hex Keys: https://amzn.to/3gIYdNV.
Wera Ratchet and Socket Set: https://amzn.to/3gH0OrY.
Knipex Cutter: https://amzn.to/2Wylf2M.
Ifixit Tool package: https://amzn.to/3BdJXES.
Wire Stripper Tool: https://amzn.to/3kC7hoW.
3M Applicator Tool: https://amzn.to/3jqc8ud.

Other Platforms.
Patreon: https://www.Patreon.com/Vector3D.
Twitter: @Adam_V3D.

Amazon Video

Building a Voron 2.4 Live! Part 7: Skirts, Electronics and Wiring

Filafarm: http://www.filafarm.com/
BIQU Equipment: https://www.biqu.equipment/

In this video we’ll work on doing the wiring for the Afterburner PCB mod as well as add the Z belts for the gantry and maybe get on with the skirts if things go smoothly. #sponsored #Voron #3Dprinter

The Voron 2.4 is a high-performance Core XY 3D printer design with a static bed, moving gantry and designed to be a self-sourced kit. I’ve wanted to build a Voron for a while and I’m incredibly excited to finally be doing it! Subscribe and click the bell icon to get notified of when I go live.

3D printed parts have been obtained via the Print It Forward scheme (https://pif.voron.dev/) and you can check out where I got everything in this link (https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing). If you choose to self source, I recommend setting up a tracker like this so you know what you need to buy and if its been purchased and/or delivered.

Filafarm have provided a full bed kit specific for the 2.4 which you can find on their website. Bigtreetech have provided the Octopus control board, stepper drivers and 12864 display. Linneo have supplied the harness/electronics kit, and OneTwo3D have provided the Omron proximity sensor. For Voron specific parts from Filafarm, check the links in my bill of materials here: https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing

More Sponsor Links
Bigtreetech Octopus: https://www.biqu.equipment/products/pre-sale-bigtreetech-octopus-v1-0
BigTreeTech Mini 12864 Display: https://www.biqu.equipment/products/bigtreetech-mini12864-v1-0-lcd-screen-rgb-backlight-mini-display-supports-marlin-diy-for-skr-3d-printer-part
BigTreeTech TMC2209: https://www.biqu.equipment/products/bigtreetech-tmc2209-stepper-motor-driver-for-3d-printer-board-vs-tmc2208?_pos=1&_sid=e3b60a846&_ss=r&variant=20498074632290
Filafarm Filaprint: https://www.filafarm.de/products/filaprint-rs-1?_pos=1&_sid=725f6f274&_ss=r&variant=40505593069745
Filafarm Switch: https://www.filafarm.de/products/switch?variant=40505825525937
Filafarm Precision Plate: https://www.filafarm.de/products/aluminium-prazisionsplatten?_pos=2&_sid=725f6f274&_ss=r&variant=40505371623601#

More Voron Info:
Voron 2.4 home page: https://vorondesign.com/voron2.4
Voron 2.4 Manual [download]: https://github.com/VoronDesign/Voron-2/raw/Voron2.4/Docs/2.4_Assembly_Manual.pdf
Octopus Help for Voron 2.4: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Octopus%20works%20on%20Voron%20v2.4

Tools
Wera Hex Keys: https://amzn.to/3gIYdNV
Wera Ratchet and Socket Set: https://amzn.to/3gH0OrY
Knipex Cutter: https://amzn.to/2Wylf2M
Ifixit Tool kit: https://amzn.to/3BdJXES
Wire Stripper Tool: https://amzn.to/3kC7hoW
3M Applicator Tool: https://amzn.to/3jqc8ud

Other Platforms
Patreon: https://www.Patreon.com/Vector3D
Twitter: @Adam_V3D