Amazon Video

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics

Avid 4848 Pro Setting Up– Gantry, Shelf as well as Pinion, as well as Electronic devices
Click MORE!

In this video clip, I’ll end up the assemble my new Avid CNC 4848 Pro router! Initially I’ll reveal you how I constructed the Gantry. I’ll after that set up as well as mount the Pack and Pinion drives. I’ll reveal you the installation of the Z axis and also 4 hp air-cooled spindle. I’ll offer you a peek into what is included in mounting the cord tracks, running all the cable televisions, as well as placing the electronics boxes.

Lastly, I’ll offer you couple a lot more ideas that I got while finishing up the setting up.

Customarily, if you have any type of comments or inquiries about anything I covered in this video, please join me for the Live Q&A, or place ’em in the comment section below.

On Sunday, July 24th, I’ll be holding a LIVE Q&A session, where you can ask your questions relating to anything I’ve covered in this video clip. That Q&A begins at 3 pm Eastern time, Noon Pacific time. Want to see you there!

Here’s a web link to the Live Q&A: https://youtu.be/DSCA2hzK3FU

Link to the 6mm long reach Ball End Hex chauffeur bits I utilized: https://amzn.to/3B5ltAT
Web Link to Metric Ball End Hex Key set I utilized: https://amzn.to/3v8mOTM
Link to Metric Ball End Hex screwdriver bit set: https://amzn.to/3B8kLTA

For more info, or to set up an Avid CNC of your own, visit their internet site: https://www.avidcnc.com/
______________________________________________________________________________
If you ‘d such as to support my network and aid with the making of future videos, please consider ending up being a channel participant. If you ‘d rather make an one-time donation, you can do that by utilizing the following web link:
PayPal: https://paypal.me/MarkLindsayCNC

Straight web link to more details on coming to be a Channel Member: https://www.youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you quite!
______________________________________________________________________________
Web link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Web link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Obtain your Official Mark Lindsay CNC T-shirts as well as coffee cups here:
http://marklindsaycnc.com/index.php/product-category/logo-products/

marklindsaycnc.com is funded by Harneal Media– a site developing firm that specializes in web sites for the manufacturer area. Learn more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, organized by my close friend Eloy Escagedo and also I. “Two guys from different years, histories, as well as contrary sides of the continent talk about life, the universe, and every little thing. What’s the show regarding? About a hr …”.
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ.
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast.
Previous Episodes available at our web site: https://trampledunderfootpodcast.com/.
______________________________________________________________________________.
For more details on, or to download a free test of Cut 2D, VCarve, or Aspire, go to the Vectric internet site at:.
http://www.vectric.com/.
______________________________________________________________________________.
Some links might be affiliate or enroller links. Buying and even clicking through these web links assists with the production of future video clips.
I appreciate your support!
This video is for educational as well as entertainment objectives just.
#avidcnc # 4848Pro #cncrouter.

Amazon Video

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics
Click MORE!

In this video, I’ll finish the assemble my new Avid CNC 4848 Pro router! First I’ll show you how I assembled the Gantry. I’ll then assemble and mount the Pack and Pinion drives. Then I’ll show you the installation of the Z axis and 4 hp air-cooled spindle. I’ll give you a peek into what is involved in mounting the cable tracks, running all the cables, and mounting the electronics boxes.

Finally, I’ll give you couple more tips that I picked up while finishing up the assembly.

As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.

On Sunday, July 24th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!

Here’s a link to the Live Q&A: https://youtu.be/DSCA2hzK3FU

Link to the 6mm long reach Ball End Hex driver bits I used: https://amzn.to/3B5ltAT
Link to Metric Ball End Hex Key set I used: https://amzn.to/3v8mOTM
Link to Metric Ball End Hex screwdriver bit set: https://amzn.to/3B8kLTA

For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: https://paypal.me/MarkLindsayCNC

Direct link to more information on becoming a Channel Member: https://www.youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/

marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. “Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What’s the show about? About an hour…”
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: https://trampledunderfootpodcast.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter

Amazon Video

CNC Electronics 6.wmv

Patrick’s Tip Jar:
bitcoin:1 Gtawd29Sgu5CdvfUnkRg1YBfowCawjFdH.
Ether:0 xa962365100011B79097A7bb9DD51A53eE98266bb.
If you have actually located this video clip to be practical, take into consideration making a suggestion. Thanks.
This is the 6th video in a video clip collection on CNC electronics. In this video clip, the breakout board is arrangement and also one vehicle driver is attached to the outbreak board.

Tools that I make use of to make videos:.
Canon EOS Rebel: http://amzn.to/2rJSeh0.
Macro Lens: http://amzn.to/2qaSKmK.
Microphone: http://amzn.to/2qO2RB4.
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): http://amzn.to/2ruFnSn.
The composing pencil I make use of on these video clips: http://amzn.to/2qioYg2.
The economical oscilloscope that I make use of (since it’s affordable and also will certainly function every one of the tasks in these tutorials): http://amzn.to/2rSHnBa.
A much better oscilloscope and also the one I would certainly recommend: http://amzn.to/2qizK5M.
The brand of multimeter that I use as well as the one I advise: http://amzn.to/2qicUez.

Wish to have your very own Patreon campaign? https://patreon.com/invite/wpllxz.

Please watch: “51. How to Add Interrupts for the ADC – ARM Microcontroller Part 2 – ARM STM32 Microcontroller”.

Amazon Video

CNC Electronics 6.wmv

Patrick’s Tip Jar:
bitcoin:1Gtawd29Sgu5CdvfUnkRg1YBfowCawjFdH
Ether:0xa962365100011B79097A7bb9DD51A53eE98266bb
If you have found this video to be helpful, consider making a tip. Thanks.
This is the sixth video in a video series on CNC electronics. In this video, the breakout board is setup and one driver is connected to the breakout board.

Equipment that I use to make videos:
Canon EOS Rebel: http://amzn.to/2rJSeh0
Macro Lens: http://amzn.to/2qaSKmK
Microphone: http://amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): http://amzn.to/2ruFnSn
The drafting pencil I use on these videos: http://amzn.to/2qioYg2
The cheap oscilloscope that I use (because it’s cheap and will work all of the projects in these tutorials): http://amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: http://amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: http://amzn.to/2qicUez

Want to have your own Patreon campaign? https://patreon.com/invite/wpllxz

-~-~~-~~~-~~-~-
Please watch: “51. How to Add Interrupts for the ADC – ARM Microcontroller Part 2 – ARM STM32 Microcontroller”

-~-~~-~~~-~~-~-

Amazon Video

Upgraded Electric Fly Swatter – Woodworking & Electronics

The flies moved into my shop this summer and an ordinary fly swatter just wouldn’t do. So I made an Unnecessary Walnut electric fly swatter and now those bugs are running scared!

0:00 What & Why
0:59 Computer Tips
2:33 Carving
5:17 The Hitch In The Plan
6:43 Assembly
8:36 Fly Testing

Learn more about the X-Carve: https://www.inventables.com/
Sign Up For Easel: https://bit.ly/2IbODz7
X-Carve: https://bit.ly/2IaKmvG

Soldering Iron: https://amzn.to/31InHnD
Fly Swatter: https://amzn.to/32FkvIM
Jointer: https://amzn.to/2BdHRec
Table Saw: https://amzn.to/2F1Eir6
Miter Saw: https://amzn.to/2VLxSDC
Bandsaw: http://amzn.to/2qoKfYf
Squeeze Clamps: https://amzn.to/2YPMiVA
Quick Clamps: https://amzn.to/32DTe9p

Patreon: https://www.patreon.com/gunflintdesigns
My Website: http://gunflintdesigns.com
Gunflint Designs T-Shirt: https://www.amazon.com/dp/B07C3RJGHV
We Built A Thing T-Shirt :https://amzn.to/2TK8z2w
My Amazon Shop: https://www.amazon.com/shop/gunflintdesigns
Instagram: @gunflintdesigns:
https://www.instagram.com/gunflintdesigns/

Amazon Video

Awesome Electronics Housing Machining And Amazing Tools For Heavy Duty CNC Machine.

Awesome Electronics Housing Machining And Amazing Tools For Heavy Duty CNC Machine.
Please SUBSCRIBE: https://bit.ly/3e8Hz7t
——————————————————
In this video:
1. Datron CNC: https://www.datron.com/
2. Tsugami: https://www.tsugami.co.jp/
And Rem Sales, LLC: https://www.remsales.com/
3. BOST MACHINE TOOLS COMPANY: http://www.bost.es/

——————————————————
We would like to support all companies or people to promote their products, service or company. If you need our support, don’t hesitate to contact us via email wowtv2050@gmail.com.
If you are copyright video owner and don’t want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-oporation.

Amazon Video

Live: Building the MPCNC! (5 – Wiring and electronics)

It’s time – the MPCNC (Burly edition) is getting built!
In the daily livestreams, together we build the MPCNC step-by-step In the end, it will be a fully functional CNC multitool, but mostly a light-duty CNC router suitable for plastic, wood or even aluminum.

Parts list http://go.toms3d.org/mpcnc
V1 Engineering assembly instructions https://www.v1engineering.com/assembly/

💙 Enjoying the videos? Support my work on Patreon! https://www.patreon.com/toms3dp

🎥 All my video gear https://toms3d.org/my-gear
Music by Epidemic Sound http://share.epidemicsound.com/MadeWithLayers

Amazon Video

Design Tips for Electronics Enthusiasts

As a graphic developer transformed engineer, Ben has a bonanza of suggestions as well as techniques for making your electronics jobs look incredible. In this episode he’ll offer insight on the process of making, discuss some specifications to maintain in mind, in addition to share his ideas in creating a visually pleasing layout.
____________________

New episodes every Sunday!

Enter to win some of Ben’s builds at element14: http://www.element14.com/tbhs

See this episode on Revision3.com: http://revision3.com/tbhs/design-tips-for-electronics-enthusiasts

Be sure to share, like as well as comment this video clip: http://youtu.be/kuZ0kA7pJ9A

Subscribe for even more mods and jobs: http://www.youtube.com/subscription_center?add_user=thebenheckshow.

Check out even more of Ben’s work: http://www.youtube.com/thebenheckshow.
–.
Attach with The Ben Heck Show for more tips as well as jobs.
Twitter: https://twitter.com/benheck.
Facebook: https://www.facebook.com/BenHeckShow.

Uncategorized

DIY CNC Electronics Enclosure

Upgrading the electronics on a budget in my CNC Plasma cutter. Also trying out the new LinuxCNC PlasmaC configuration.

Tools and Parts Used in this Video:
Wire Crimper and Stripper Set – https://www.banggood.com/custlink/3D33LMlTP0
Stepper Motor Driver – https://www.banggood.com/custlink/mDvGOqLuZ7
Switching Power Supply – https://www.banggood.com/custlink/mKDvl2O7Ot
Ammo Crate – https://amzn.to/2LrNSHa
6061 Aluminum Plate – https://amzn.to/2LpSNYR
Wire Raceway Kit – https://amzn.to/2NW41pZ
Cable Gland Kit – https://amzn.to/2NVfINv
Panel Mount Fuse – https://amzn.to/2LpMuoc
Panel Mount Voltage/Amp Meter – https://amzn.to/2Na8qGi

Other CNC items on sale at Banggood 13th anniversary sale:
https://www.banggood.com/custlink/Dmvmo2lfMK
https://www.banggood.com/custlink/3m3vLMLTU5
https://www.banggood.com/custlink/3mmmakLuzS
https://www.banggood.com/custlink/33mKlzOTql

Making Stuff Patreon page – https://www.patreon.com/MakingStuff

Help support the channel at the Making Stuff Amazon Affiliate Link – https://www.amazon.com/shop/makingstuff

Thanks for watching!

#cncplasma
#cncelectronics
#cncupgrade

Uncategorized

Design Tips for Electronics Enthusiasts

As a graphic designer turned engineer, Ben has a treasure trove of tips and tricks for making your electronics projects look awesome. In this episode he’ll provide insight on the process of designing, explain some parameters to keep in mind, as well as share his thoughts in creating an aesthetically pleasing design.
____________________

New episodes every Sunday!

Enter to win some of Ben’s builds at element14: http://www.element14.com/tbhs

Watch this episode on Revision3.com: http://revision3.com/tbhs/design-tips-for-electronics-enthusiasts

Be sure to share, like and comment this video: http://youtu.be/kuZ0kA7pJ9A

Subscribe for more projects and mods:http://www.youtube.com/subscription_center?add_user=thebenheckshow

Check out more of Ben’s work:http://www.youtube.com/thebenheckshow

Connect with The Ben Heck Show for more projects and tips
Twitter: https://twitter.com/benheck
Facebook: https://www.facebook.com/BenHeckShow