Amazon Video

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics

Avid 4848 Pro Setting Up– Gantry, Shelf as well as Pinion, as well as Electronic devices
Click MORE!

In this video clip, I’ll end up the assemble my new Avid CNC 4848 Pro router! Initially I’ll reveal you how I constructed the Gantry. I’ll after that set up as well as mount the Pack and Pinion drives. I’ll reveal you the installation of the Z axis and also 4 hp air-cooled spindle. I’ll offer you a peek into what is included in mounting the cord tracks, running all the cable televisions, as well as placing the electronics boxes.

Lastly, I’ll offer you couple a lot more ideas that I got while finishing up the setting up.

Customarily, if you have any type of comments or inquiries about anything I covered in this video, please join me for the Live Q&A, or place ’em in the comment section below.

On Sunday, July 24th, I’ll be holding a LIVE Q&A session, where you can ask your questions relating to anything I’ve covered in this video clip. That Q&A begins at 3 pm Eastern time, Noon Pacific time. Want to see you there!

Here’s a web link to the Live Q&A: https://youtu.be/DSCA2hzK3FU

Link to the 6mm long reach Ball End Hex chauffeur bits I utilized: https://amzn.to/3B5ltAT
Web Link to Metric Ball End Hex Key set I utilized: https://amzn.to/3v8mOTM
Link to Metric Ball End Hex screwdriver bit set: https://amzn.to/3B8kLTA

For more info, or to set up an Avid CNC of your own, visit their internet site: https://www.avidcnc.com/
______________________________________________________________________________
If you ‘d such as to support my network and aid with the making of future videos, please consider ending up being a channel participant. If you ‘d rather make an one-time donation, you can do that by utilizing the following web link:
PayPal: https://paypal.me/MarkLindsayCNC

Straight web link to more details on coming to be a Channel Member: https://www.youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you quite!
______________________________________________________________________________
Web link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Web link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Obtain your Official Mark Lindsay CNC T-shirts as well as coffee cups here:
http://marklindsaycnc.com/index.php/product-category/logo-products/

marklindsaycnc.com is funded by Harneal Media– a site developing firm that specializes in web sites for the manufacturer area. Learn more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, organized by my close friend Eloy Escagedo and also I. “Two guys from different years, histories, as well as contrary sides of the continent talk about life, the universe, and every little thing. What’s the show regarding? About a hr …”.
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ.
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast.
Previous Episodes available at our web site: https://trampledunderfootpodcast.com/.
______________________________________________________________________________.
For more details on, or to download a free test of Cut 2D, VCarve, or Aspire, go to the Vectric internet site at:.
http://www.vectric.com/.
______________________________________________________________________________.
Some links might be affiliate or enroller links. Buying and even clicking through these web links assists with the production of future video clips.
I appreciate your support!
This video is for educational as well as entertainment objectives just.
#avidcnc # 4848Pro #cncrouter.

Amazon Video

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics

Avid 4848 Pro Assembly – Gantry, Rack and Pinion, and Electronics
Click MORE!

In this video, I’ll finish the assemble my new Avid CNC 4848 Pro router! First I’ll show you how I assembled the Gantry. I’ll then assemble and mount the Pack and Pinion drives. Then I’ll show you the installation of the Z axis and 4 hp air-cooled spindle. I’ll give you a peek into what is involved in mounting the cable tracks, running all the cables, and mounting the electronics boxes.

Finally, I’ll give you couple more tips that I picked up while finishing up the assembly.

As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.

On Sunday, July 24th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!

Here’s a link to the Live Q&A: https://youtu.be/DSCA2hzK3FU

Link to the 6mm long reach Ball End Hex driver bits I used: https://amzn.to/3B5ltAT
Link to Metric Ball End Hex Key set I used: https://amzn.to/3v8mOTM
Link to Metric Ball End Hex screwdriver bit set: https://amzn.to/3B8kLTA

For more info, or to configure an Avid CNC of your own, visit their website: https://www.avidcnc.com/
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: https://paypal.me/MarkLindsayCNC

Direct link to more information on becoming a Channel Member: https://www.youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/

marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. “Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What’s the show about? About an hour…”
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: https://trampledunderfootpodcast.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter

Amazon Video

CNC Electronics Unboxing

I am upgrading a Grizzly G0704 to CNC utilizing parts from Automation Technologies Inc. The package includes stepper motors, Digital stepper motor drivers, power supply, C32 Breakout board, Ethernet Smoothstepper motion control card cable televisions and also even more.

Amazon Video

CNC Electronics Unboxing

http://themakersguide.com CNC Electronics components unboxing. I am upgrading a Grizzly G0704 to CNC using components from Automation Technologies Inc. The package includes stepper motors, Digital stepper motor drivers, power supply, C32 Breakout board, Ethernet Smoothstepper motion control card cables and more. There is a blog post at http://www.themakersguide.com/making-cnc-milling-machine-cnc-electronics with more details.