trailers – FJM ECOM

Click for more info and reviews of this ASA Electronics RV Air Conditioners:
https://www.etrailer.com/Accessories-and-Parts/ASA-Electronics/ACCARKIT.html
Check out some similar RV Air Conditioners options:
https://www.etrailer.com/dept-pg-Accessories_and_Parts-sf-RV_Air_Conditioners.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-ASA-Electronics-Carrier-Adapter-Wiring-Kit-For-Advent-Air-RV-Air-Conditioner-ACCARKIT.aspx
Hi, everybody, Andy here with etrailer.com, and today we’re gonna take a brief look at this carrier adapter wiring kit for the Advent Air RV air conditioners. If you are wanting to replace your carrier AC unit with an Advent Air air conditioner, you are going to need this adapter wiring kit. This adapter kit lets you replace your existing carrier AC unit with an Advent Air AC unit, allowing the Advent Air AC to work with your existing carrier ceiling vent and thermostat. Now, on your screen, I am including the model numbers of the Advent Air RV air conditioners that this adapter kit will work with. So you see those item numbers or model numbers there on your screen for you. This is going to include the installation hardware that you are going to need.

And also this instruction sheet to guide you during the installation process. Well, that’s gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..

Uncategorized

Review of Furrion Boat Accessories – Electronics – FMS5L2BLOEM – etrailer.com

April 16, 2019 fjm1972

Click for more info and reviews of this Furrion Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Furrion/FMS5L2BLOEM.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Furrion-Boat-Accessories-Electronics-FMS5L2BLOEM.aspx
Today, we’re going to take a look at the Furrion 30 watt recess mount Marine speaker with an LED ring. Now, this outdoor speaker will project sound from your TV or radio on your boat, RV, or camper. It is a dual cone design which features a dome tweeter and a polypropylene woofer cone. The dome tweeter increases high frequency sound distribution and a woofer cone produces the base sounds and internal dampening.Has a nice LED ring inside the speaker that’ll give a nice blue glow to the speaker. I am going to hook this up at the end of this video just to show you how bright that is. It’s made of a durable AVS plastic construction.

It is UV resistant and water-proof. It is a simple bolt on installation. Now, the mounting hardware to install this is not included. It’s a black color.Few specs on this. The woofer diameter is going to be, the inside portion right at five inches.

Maximum voltage on this is 30 watts. The impedance is four ohms. Sensitivity is 85 decibels. Frequency response is a 120 Hertz to 20 Kilohertz. It is for quality of one speaker.Few dimensions on this.

Overall dimension from edge to edge is going to be right at six inches. Total depth front to back is right at two and one eighths inches deep. Now, the cut out diameter since this is a recess mount, the portion that you need to have cut out that this will fit into, cut out diameters going to be right at four and three eighths inches. The mounting hole spacing, in other words the mounting hole center to center, is right at three and fifteen sixteenths of an inch.So, again, here’s your black and red wire for your LED ring. We’re going to go ahead and hook that up.

I got some 12 volt power here. Go ahead and hook that up. And, once we get it all hooked up, what I’m going to do is go ahead and turn our power on and you’ll see the ring come on. What I’m going to do is go ahead and turn off the overhead lights, so it gives you a nice, you can see the blue glow from the LED lights inside the speaker.We’ll go ahead and turn back on our overhead lights. But, that should do it for the review on the Furrion 30 watt recess mount Marine speaker with the LED ring.

Uncategorized

Review of Furrion Boat Accessories – Marine Power,Electronics – FTVINSSS – etrailer.com

April 16, 2019 fjm1972

Click for more info and reviews of this Furrion Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Furrion/FTVINSSS.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Marine_Power.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Furrion-Boat-Accessories-Marine-Power,Electronics-FTVINSSS.aspx
Today we’re going to take a look at the Furion round TV satellite marine and RV stainless steel power inlet. Now this marine power inlet will help you stream TV or satellite at sea. Uses a nice quick lock cap to keep the inlet dry. You can see when you twist it to open it, and then when you close it you just twist it to lock it. It’s a marine grade stainless steel outer casing. It is a universal fit.

It’s compatible with other brands. It is designed to mount to the wall. The mounting hardware and the rubber gasket to help seal it is all included.This does connect to your boat or RV’s coaxial cable. You just bring the cable in through the back here, uses this black plastic strain relief on the rear to keep the cable from getting damaged. Has a nice hand polished mirror finish to it.

You can see just twist it, open it up, there’s your coaxial cable connection. Close it, twist it to lock it. This part is tested to marine UL498 and CSAC22.2 standards. Just to give you a dimension on this, the overall diameter at the widest point, probably right at four inches. The total depth from the front to the very back of the strain relief is right at three and a quarter inches deep.

But that should do it for the review on the Furion round TV satellite marine and RV stainless steel power inlet.

Uncategorized

Review of Command Electronics – Trailer Lights – 328-140-58 – etrailer.com

March 4, 2019 fjm1972

Click for more info and reviews of this Command Electronics Trailer Lights:
https://www.etrailer.com/Accessories-and-Parts/Command-Electronics/328-140-58.html
Check out some similar Trailer Lights options:
https://www.etrailer.com/dept-pg-Accessories_and_Parts-sf-Trailer_Lights.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Command-Electronics-Trailer-Lights-328-140-58.aspx
Today we’re gonna take a quick look at the replacement black gasket for Command Electronics Hot Line LED Trailer Back Up Light.This is going to be a new gasket for your lights so you can get that mounted up and have a nice, secure seal on the back of your light. It does have some adhesive at the back, so if you just pull this backing tape off, you can stick that onto your trailer. You just want to make sure that you clean that off really well. Maybe use a little isopropyl alcohol or some soapy water or something to clean it off and then you can attach your new gasket and just press it into place. Maybe press and hold for a few seconds to make sure it gets a good adhesion.Now, again, this is going to be for the Command Electronics Hot Line LED Backup Light. That part number is 328-003-6017W.

That’s also available here at etrailer.com if you need to pick up a new light as well.As far as our dimensions, the gasket is going to measure 15 1/4 inch overall. It’s gonna be about one and a quarter inch wide and about three eighths of an inch thick.That’s gonna do it for our look at the replacement black gasket for Command Electronics Hot Line LED Trailer Backup Light.

Uncategorized

Review of Way Interglobal Boat Accessories – Electronics – 324-000016 – etrailer.com

February 25, 2019 fjm1972

Click for more info and reviews of this Way Interglobal Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Way-Interglobal/324-000016.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Way-Interglobal-Boat-Accessories-Electronics-324-000016.aspx
Today we’re going to take a look at the Surface Mount 35 Watt Marine Speaker with LED lights for a quantity of one.Now this outdoor speaker will project sound from your TV or radio onto your boat, RV or camper. This speaker is a dual cone design which features a wizard cone and a Woofer cone. The wizard cone produces the high frequencies more effectively and the woofer cone produces the bass sounds and the internal dampening.It does also offer for blue LED lights which provide a nice luminous glow-in-the-dark and at the end of this video I am going to hook it up to power just to show you how that light is. It’s a durable plastic construction, which is UV resistant and waterproof. Does have this rubber gasket here that when you install it helps prevent leakage. Simple bolt on installation.

You can see the four holes right here.Now the mounting hardware to install is not included. It’s a glossy black color. Woofer diameter on this speaker is right at three inches. Maximum wattage is 35 watts. The impedance is four ohms.

Quantity of one speaker.Few measurements on this. I want to give you the overall dimension, which is diameter, edge to edge. So you’re looking right at five and a half inches. Total depth, and you can see the speaker does have an angle to it, so at the highest point, total depth is going to be right at three inches. And the mounting hole spacing for your four mounting holes, center to center, distance is right at three and a half inches.So again, we’re going to hook this up to some power just so I can show you the lights and we’ll turn off the overhead lights.

We’ll go ahead and turn our black and we’ll go ahead . it’s just two wires. One ground wire and a power wire. So once we got those hooked up, go ahead and turn on the power.You can see with it turned on, the blue glow there. So I’ll go ahead and turn off the overhead lights and there you can see when you have power to your speaker, you can see the nice blue glow.

And again it’s hard to tell how many LEDs. I think it’s about four, but does it give you a nice glow to itWe’ll go ahead and turn back on our overhead lights, disconnect our connections there, but that should do it for the review on the Surface Mount 35 Watt Marine Speaker with LED lights for a quantity of one.

Uncategorized

Review of Way Interglobal Boat Accessories – Electronics – 324-000015 – etrailer.com

February 25, 2019 fjm1972

Click for more info and reviews of this Way Interglobal Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Way-Interglobal/324-000015.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Way-Interglobal-Boat-Accessories-Electronics-324-000015.aspx
Today we’re going to take a look at this surface mount 35 watt marine speaker, for a quantity of one. Now this outdoor speaker will project sound from your TV or radio onto your boat, RV, or camper. This speaker’s a duel cone design which features a whizzer cone and a woofer cone. The whizzer cone produces the high frequencies more effectively, and the woofer cone produces the bass sounds and internal dampening.It’s a durable plastic construction, it’s UV resistant, and water proof. It includes a rubber gasket here when you mount it to prevent moisture getting to the speaker. It is a simple bolt on insulation.

You can see the four holes here to install it. Now the mounting hardware is not included.It is a glossy black color. A few specs on this, the woofer diameter is gonna be right at three inches. Maximum wattage is 35 watts. The impedance is four ohms.

It is for a quantity of one speaker. A few dimensions on this, the over all dimension, so the diameter from this side to this side right at five and a half inches. Total depth, you can see it has an angle to it, so at the highest point it’s gonna be right at three inches deep. And the mounting hole spacing, the distance, these four mounting holes, the distance from the center of one to the center of the other is right at three and a half inches.But that should do it for the review on the surface mount 35 watt marine speaker for a quantity of one.

Uncategorized

Review of Way Interglobal Boat Accessories – Electronics – 324-000018 – etrailer.com

February 25, 2019 fjm1972

Click for more info and reviews of this Way Interglobal Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Way-Interglobal/324-000018.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Way-Interglobal-Boat-Accessories-Electronics-324-000018.aspx
Today we’re going to take a look at the recessed mount, 35 watt marine speaker for a quantity of one. Now this outdoor speaker will project sound from your TV and radio onto your boat, RV or camper. This one is a dual cone design, so it does feature wizard cone in a Woofer cone. The wizard cone produces the high frequencies and more effectively and the Woofer cone will produce the bass sounds and the internal dampening. It’s a durable plastic construction. It’s UV resistant and waterproof.

It is a simple bolt on installation. The four screw holes right here. Now the mounting hardware to install this is not included. And see it’s black color. Few specs on this, the Woofer diameter, it’s going to be right at 5 1/4 inches.

The maximum wattage on this is 35 watts. The impedance is four Ohms. Quantity is for one speaker.Now the overall dimensions from this side to this side of the that diameter with the grill included is right at six inches. Total depth on it to the very top is right at two inches deep. Now this is a recessed mount, so the cutout dimensions, which is this portion here that goes into the cutout, the diameter on that is going to be right at four and a half inches.

And the depth on the cutout part is going to be right at 1 3/8 inches deep. The mounting hole spacing, in other words, the distance between the mounting holes, center to center is right at 3 7/8. But that should do it for the review on the recess mount 35 watt marine speaker for a quantity of one.

Uncategorized

Review of Scosche Boat Accessories – Electronics – 332-ACM3 – etrailer.com

February 25, 2019 fjm1972

Click for more info and reviews of this Scosche Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Scosche/332-ACM3.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Scosche-Boat-Accessories-Electronics-332-ACM3.aspx
Today we’re going to take a look at the Scosche Marine Radio Cover. This is going to have a flip up door and it comes in black. This is going to help protect our radio in our boat or any other marine application. It’s going to have this nice spring loaded cover that pops up with a touch of the button there, their label on it or logo. Just is a little lever action with some springs and we do have a nice gasket going all the way around the opening of our cover. There’s also another rubber gasket to go on the back to keep everything nice and sealed.

This is going to work with most shaft and DIN style stereos. We do have the mounting hardware that comes with it. We’ll have six screws in total to go around our cover and secure it in place. This also comes with an instruction sheet and a drilling template so you can everything mounted up where it needs to be. And as you can see it comes in a nice black color, but our case is slightly see-through so you can still see your stereo through the case itself.

As far as the dimensions, it’s going to be about 8-5/8″ long x 4-1/4″ wide and about 1-7/8″ deep. And that’s going to do it for our look at the Scosche Marine Radio Cover with a Flip up Door in black.

Uncategorized

Review of Scosche Boat Accessories – Electronics – 332-ACM3W – etrailer.com

February 25, 2019 fjm1972

Click for more info and reviews of this Scosche Boat Accessories:
https://www.etrailer.com/Boat-Accessories/Scosche/332-ACM3W.html
Check out some similar Boat Accessories options:
https://www.etrailer.com/dept-pg-Boat_Accessories-sf-Electronics.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Scosche-Boat-Accessories-Electronics-332-ACM3W.aspx
Today we’re taking a look at a radio cover. Now this is a Weather Shield that’s designed to protect your stereo from the elements. So this would be great for marine as well as off road applications like UTVs. It’s a really nice design, made from like a durable plastic construction. It does come with a front gasket, which is located right here. And a rear gasket, and these are designed to form a seal to protect your stereo against water damage.

It has the automatic flip up door that stays open for easy stereo access and secures in the closed position. So it protects the stereo. And then when you’re ready to use your stereo, you press on this lever here, and then that door flips open and remains open. It’s spring loaded. This is designed to work with most shaft DIN and removable face style stereos.The lens features a UV resistant design.

And then when it comes to the overall dimensions of the unit, edge to edge right here, we’re looking at about eight and 5/8 inches. Very top to very bottom, including the tab, measures about four and 1/4 inches. And then the overall depth, so it’s installed, it sticks out from the installation surface about one and 7/8 inches. So that’s the overall depth. Now with this part number, you get the shield, base, and lit assembly.

You also get the two shaft tabs, you get your front gasket, rear gasket and you get your hardware for installation. Comes with six one inch Philips Head screws. Those are stainless steel, so you don’t have to worry about them rusting or corroding. It also comes with a drilling template, shows your exact measurements and your cut out. So it shows 2.125 inches up and down, 7.240 inches side to side for the installation of a stereo, that would be a new install, replacing the stereo and the panel for the first time and having to do your own cut out.

And then it also comes with the instruction sheet, so it walks you through the entire set up, and install step-by-step.So all that’s included. But again, this is designed to protect your stereo from the elements, and it’s great for marine and off road applications. That’s going to do it for today’s look at the Weather Shield Radio Cover.