Amazon Video

Amazing simulation electronics tip #shorts

https://youtu.be/Ma0E7hWWfqE

ENABLE YOUR NOTIFICATION

🌹 THANK YOU VERY MUCH🌹

my videoes are just for entertainment nothing more (DO NOT TRY AT HOME)
*******************************************************
WARNING!
This video is made solely for viewing and enjoying the scenes and spending time
The videos of this channel have no practical aspect and no specific or general application in the real world.
The videos of this channel are just for fun and entertainment.
There is no need for you to repeat it and it is strongly recommended that you do not use it anywhere and do not repeat it.
If you repeat these things, you are responsible for any accidents or bad incidents or events
and The creator of the video has no responsibility in this regard.
The producer of the videos of this channel emphasizes do not repeat these actions.
*******************************************************
In this channel, I present to you the result of my efforts.
In making these devices, personal safety accessories such as gloves, masks, special glasses, face shield and protective clothing have been used. You must also use personal protective equipment.
Working with iron and welding equipment and cutting and drilling has its risks if you do not have sufficient knowledge and skills in this field. Never act in this field and seek help from a professional and experienced master in this field.
All videos on this channel are entertaining and experimental. The producer of these videos has no intention or request for others to do it and strongly recommends that you do not repeat any of the work done in the videos. In this regard, the owner of this channel or the producers of video in this channel will not be responsible and will not accept any responsibility in this regard.
Please subscribe to my channel and support me by liking my video.
Thank you
MoRe

Amazon Video

Global Industrial Workbench installed at D-Lab Electronics Shop Expansion My Patreon funds at work

Action 1 of the growth total. Next, I will certainly be relocating onto illumination. It will consist of 12 Eaton Industrial 4 foot LED ceiling place lights. Must supply enough light to carry out surgical procedure! Yes, I recognize in this current world, it may not be the most effective timing, However I think as things come to be harder to get, individuals will transform back to fixing what they have. I wish to be prepared for that modification. D-Lab is increasing. Wish to become part of it? See: https://www.patreon.com/dlab_electronics?fan_landing=true
Check Out Johnson Workbenches: http://theworkbench.com

Amazon Video

2019 Vintage electronics expo Farmington Hills, MI Antique Radio Swapmeet

We had an excellent time. Stayed at the Holiday Inn, spent some high quality time together, delighted in fantastic food, loved out time away from the regular regimen. I was really pleased to be greeted by people that have enjoyed this YouTube Channel.

Amazon Video

#56 Duet CNC Controller P4 – Fitting Enclosure Electronics, Buttons, Switches & PanelDue 7i

In this video I install the CNC electronic devices into the room and wire things up prepared for the next phase– which will probably be a lot more adjusting the electronics because I realised, I failed to remember to do a something and also then had an originality. The majority of the video was shot before Christmas, and also I assume I shed some footage, so I jump to numerous things having actually been done. This is more of a reflective video clip about the process yet hopefully still valuable to people wishing to do a comparable point.

00:00 Intro Update
00:24 More Relays – M80
01:23 PSU for Laser Adaptor
01:58 Transparent Buttons
02:36 PanelDue 7i
04:15 Shutting Machine with Code
04:27 Installation Fans
06:00 Installation Buttons
06:46 Installation NVR
07:24 Magic of Cinema …
07:49 The electrical wiring
12:12 Look it transforms on!

Acquire The Moot_One CNC Manual: https://miscpro.com/product/moot_one-desktop-cnc-machine/
CNC Timeline: https://miscpro.com/cnc-control-box-timeline/

Subscribe: https://goo.gl/FmlHU7
Patreon: https://www.patreon.com/EducatingSavvas
Images: http://instagram.com/savvas_papasavva
Key Channel: http://www.youtube.com/SavvasPapasavva

Amazon Video

2020 MARC Vintage electronics expo Cool tube Radios collectors items Ham gear, A great event

I intend to completely record the design & schematic. My hunch is a Harp player would certainly fall in love with it. We plan to participate in the summer occasion, so there is a lot more to follow.

Amazon Video

2020 MARC Vintage electronics expo Cool tube Radios collectors items Ham gear, A great event

See thevee.org. for more information on these events. This was the Winter session at Farmington Hills, MI in the Detroit area. What a super swap meet. So many classic pieces. Marcia and I had a great time. Shooting the video was a breeze. Everything fell into place. Normally I do not buy anything, however a retro guitar amp caught my eye. So, I figured why not. Glad I did as it turns out to be a very rare piece. So get ready for a refurbish series on the Premier 110. I plan to fully document the layout & schematic. And of course fully rebuild the amp. I love its style. My guess is a Harp player would fall in love with it. We plan to attend the summer event, so there is much more to follow. So, sit back, sip on your favorite beverage, enjoy the meet.

Amazon Video

Come meet D-Lab electronics 2020 Electronics Expo Farmington Hills, MI

Yes, we will be there, Feb 1st, Detroit area. I will be shooting video of the event. Then we will be shooting many more clips of vendors, attendees, strange things, mice running out of equipment, People throwing money at D-Lab, sneaking wine in, Marcia with a lamp shade, the sky’s the limit my friends! If you can make it, stop by, see some cool old stuff, smell the dust. We look forward to this every year. More details on thevee.org

Uncategorized

2019 Vintage Electronics Expo Kalamazoo Michigan Antique Radio Extravaganza

Another great event. I was there on the last day, so missed the action, however, it was still a great time with the vendors and attendees. I met some super people. Purchased a few items, just took in the sights. I love seeing/smelling the vintage electronics. It is in my blood. So, pour yourself a glass of wine, dim the lights, enjoy the show! To see future dates, see http://www.thevee.org. TD

Uncategorized

2019 Vintage electronics expo Farmington Hills, MI Antique Radio Swapmeet

Marcia and I spent our 35th anniversary at this event in Farmington hills, MI. We had a great time. Stayed at the Holiday Inn, spent some quality time together, enjoyed great food, loved out time away from the normal routine. I was very happy to be greeted by people that have enjoyed this YouTube Channel. I strive to present quality videos. Marcia and I plan to do more on location videos this year. We hope you enjoy this tour down vintage alley. For more info on this event, see: TheVee.org. Thank you to all that attended.

Uncategorized

DIY electronics workstation with overhead camera rig and lighting

New electronics makerspace: In this video we describe how we upgraded our electronics workstation and installed a LED panel and created an overhead camera rig.

BLOG: http://wayofwood.com/workstation-with-overhead-camera-rig-and-lighting

DOMINO TENON JIG: https://www.youtube.com/watch?v=Nw_IbOJjvoU
K40 WORKSHOP CART: https://youtu.be/YRDMtH18M3I

=======
Tools/Supplies Used:
– Aldi cordless drill: https://wayofwood.com/tool/aldi-cordless-drill/
– Festool Domino DF500: https://wayofwood.com/tool/festool-domino-df500/
– Hard oil: https://wayofwood.com/tool/hard-oil/
– Festool Rotex 90: https://wayofwood.com/tool/festool-rotex-90/
– Bessey toggle clamp: https://wayofwood.com/tool/bessey-toggle-clamp/
– Festool CMS router module: https://wayofwood.com/tool/festool-cms-router-module/
– Festool CMS base unit: https://wayofwood.com/tool/festool-cms-base-unit/
– Forstner drill set: https://wayofwood.com/tool/forstner-drill-set/
– Drill bit set (metric): https://wayofwood.com/tool/drill-bit-set-metric/
– Festool dominos 10×50: https://wayofwood.com/tool/festool-dominos-10×50/
– Leimboy: https://wayofwood.com/tool/leimboy/
– Felder KF700 tablesaw and shaper: https://wayofwood.com/tool/felder-kf700-tablesaw-and-shaper/
=======
VISIT my website:

Home


=======
FOLLOW ME on Social Media:
Instagram – http://www.instagram.com/wayofwood
Twitter – http://www.twitter.com/wayofwood
Pinterest – http://www.pinterest.com/wayofwood
Thingiverse – http://www.thingiverse.com/wayofwood
=======